Oil Temperature Control Units
TT-188
This powerful small temperature control unit with electronic flow control can be used with oil operation, and also in the leak-stopper mode. The TT-188 is a best-seller.
- Digital Flow Indication with control of the minimum flow.
- Automatic temperature control - difference between set and actual temperature activates an alarm
- Submersible sealless pump - manufactured from Bronze
- Self-optimizing temperature control unit with digital display of the set and actual temperature with high precision regulation in 1/10 Degree range; can be adjusted to read °C or °F
- Automatic mould drain.
- Leakstopper device — unit can be used in pressure or vacuum mode. No medium is lost on leaking tools, therefore ensuring continued production.
- Automatic water refill or manual oil refill.
- Lime scale free heat exchanger.
- Long life expectancy due to corrosion free unit.
- All components in contact with water are made of stainless steel or bronze.
- Heating switchable in stages — from 3 kW oil operation.
- Temperature range: with oil up to 150°C
- Temperature Control: self-optimizing, electronic microprocessor controller MP-888 with digital display of the set and actual value. Automatic temperature monitoring
- Flow Control: electronic, with digital display and automatic control of the minimum flow.
- Heating capacity: 3 kW oil operation.
- Cooling capacity:18 kW/h at 90°C
- Pump capacity:motor 0,75 kW
- Pressure mode: max. 4,5 BAR / max. 75 l/min
- Vacuum mode: vacuum max. 8 mH2O (water column)
- Content of unit:min 5 litres / max. 7 litres
- Connections: Medium, 1/2" female thread BSP - Cooling Water, 3/8" male thread BSP
- Dimensions: L 670mm x W 260mm x H 650mm inc. castors
- Weight: approx. 55 kg empty
- Colour: silvergrey RAL 7001
- Level control with two different levels: pre-warning with indication lamp and acoustic alarm; the unit continues to operate. If further liquid is missing, the unit stops.
- Separate mechanical safety thermostat and electronic temperature limiter installed in the controller.
- Main switch, automatic cutout, transformer and motor protection switch Horn in case of failure: the alarm for the level pre-warning is indicated with a continuous sound, all others with an intermittent sound.
