Water Temperature Control Units

TT-188

This powerful small temperature control unit with electronic flow control can be used with water or oil operation, and also in the leak-stopper mode. The TT-188 is a best-seller.

  • Digital Flow Indication with control of the minimum flow.
  • Automatic temperature control - difference between set and actual temperature activates an alarm
  • Submersible sealless pump - manufactured from Bronze
  • Self-optimizing temperature control unit with digital display of the set and actual temperature with high precision regulation in 1/10 Degree range; can be adjusted to read °C or °F
  • Automatic mould drain.
  • Leakstopper device — unit can be used in pressure or vacuum mode. No medium is lost on leaking tools, therefore ensuring continued production.
  • Automatic water refill or manual oil refill.
  • Lime scale free heat exchanger.
  • Long life expectancy due to corrosion free unit.
  • All components in contact with water are made of stainless steel or bronze.
  • Heating switchable in stages — switchable from 3 kW oil operation to 9 kW water operation.
Specifications
  • Temperature range: with water up to 90°C or with oil up to 150°C
  • Temperature Control: self-optimizing, electronic microprocessor controller MP-888 with digital display of the set and actual value. Automatic temperature monitoring 
  • Flow Control: electronic, with digital display and automatic control of the minimum flow.
  • Heating capacity: 9 kW water operation,switchable in stages 3,6,9 kW. 3 kW oil operation.
  • Cooling capacity:18 kW/h at 90°C
  • Pump capacity:motor 0,75 kW
  • Pressure mode: max. 4,5 BAR / max. 75 l/min
  • Vacuum mode: vacuum max. 8 mH2O (water column)
  • Content of unit:min 5 litres / max. 7 litres
  • Connections: Medium, 1/2" female thread BSP - Cooling Water, 3/8" male thread BSP
  • Dimensions: L 670mm x W 260mm x H 650mm inc. castors
  • Weight: approx. 55 kg empty
  • Colour: silvergrey RAL 7001
Safety Devices
  • Level control with two different levels: pre-warning with indication lamp and acoustic alarm; the unit continues to operate. If further liquid is missing, the unit stops.
  • Separate mechanical safety thermostat and electronic temperature limiter installed in the controller.
  • Main switch, automatic cutout, transformer and motor protection switch Horn in case of failure: the alarm for the level pre-warning is indicated with a continuous sound, all others with an intermittent sound.
Enquire Now

TT-188
Small Yet Powerful
Up To 150°C

This powerful small temperature control unit with electronic flow control can be used with water or oil operation, and also in the leak-stopper mode. The TT-188 is a best-seller.

Explore The Product View Full Products Range

Need help or advice on our products? Enquire Now

/Content/Images/news/Chemical.jpg

Latest News

Chemical

In 2018 Tool-Temp installed two TT430 Y units to a chemical company. These units were produced for the customer and are now listed as a machine in our product range. We flew the customer out to our head office in Switzerland to meet with the person in charge of the project, once they had all the requirements the machines went through to production. The units are equipped with three independent heat exchangers. The three-circuit cooling system makes it possible to work with oil below zero degrees. The installed self-optimizing temperature controller MP-988 works with three temperature probe inlets. The reference temperature for the regulation can be the temperature of the product inside the vessel or the oil temperature in the tank of the unit. To avoid any damage of the jacket, the pump pressure can be adjusted to the specifications of the vessel/reactor. The pump revolutions per minute can be adjusted very easily using the frequency inverter. As well as many other features.

Read Article More News