Water Temperature Control Units

TT-168-PHE

TT-168 PHE is a range of specialist units with high cooling capacities. TT-168 PHE units are ideal for use with water from 20ºC to 50ºC.

Dual heat exchangers: standard type for high temperatures, plate type can be switched on for low temperature use
Automatic mould drain
Leakstopper – operation in pressure or vacuum mode
Self-optimising microprocessor controller with digital display of set and actual temperature
Level control – audible pre-shutdown warning
Automatic temperature control – audible alarm sounds when unit deviates outside 5ºC preset (adjustable)
Automatic water refill - time limited to prevent over-filling due to defective hoses
Connection for optional external thermocouple
Limescale-free heat exchanger
Heating switchable in stages

Specifications

Model: TT-168E/PHE / TT-168H/PHE or TT-168EA/PHE / TT-168H/A/PHE
Heating Capacity: 12 kW switchable in stages 3/9/12 kW or 18 kW switchable in stages 6/12/18 kW
Temperature Range: 20ºC to 90ºC with water. The lowest medium temperature depends on the temperature of cooling water. This should be at least 10ºC lower than the temperature of the medium.
Control: self-optimising microprocessor controller with digital display of set and actual temperatures
Flow Control: Electronic with digital display and automatic control of the minimum flow.
Cooling Capacity: standard heat exchanger 20,000 kcal/h at 90ºC. Plate heat exchanger 100,000 kcal/h at 90ºC
Pump Capacity pressure mode: max 4.0 bar / max 8.0 bar - max. 75 l/min. / max. 75 l/min.
Vacuum Mode: max 8m H2O (water column)
Unit contents: min 16 litres / max 20 litres
Connections: medium: 3/4" female thread - cooling water: 1" male thread
Dimensions: L 980 x W 365 x H 740 mm incl. castors
Weight: approx 87kg
Colour: silver grey RAL 7001

Safety Devices

Enquire Now

Need help or advice on our products? Enquire Now