Water Temperature Control Units


TT-168 E, TT-168 H: For use with water up to 90ºC or oil up to 150ºC. TT-168 E/A, TT-168 H/A: For use with water up to 90ºC for larger moulds.

  • Automatic mould drain
  • Leakstopper – operation in pressure or vacuum mode
  • Self-optimising microprocessor controller with digital display of set and actual temperature
  • Level control – audible pre-shutdown warning
  • Automatic temperature control – audible alarm sounds when unit deviates outside 5ºC preset (adjustable)
  • Automatic water refill (not for oil) - time limited to prevent over-filling due to defective hoses
  • Connection for optional external thermocouple
  • Limescale-free heat exchanger
  • Heating switchable in stages – switchable from 6 kW oil operation to 12 kW water operation (TT-168 E and TT-168 H only)
Model:  TT-168E and TT-168H  TT168E/A and TT168H/A 
Heating capacity:

12  KW for water operation switchable in stages 3/9/12kW switchable for 6 kW oil operation in 3 + 3 kW 

18 kW for water operation switchable in stages 6/12/18 kW
Temperature range:  with water up to 90º C
with oil up to 150º C 
with water up to 90º C
Control: self-optimising microprocessor controller with digital display of set and actual temperatures self-optimising microprocessor controller with digital display of set and actual temperatures
Flow Control: Electronic with digital display and automatic control of minimum flow.  
Cooling Capacity:  20,000 kcal/h at 90º C (also available on request with double heat exchanger) 20,000 kcal/h at 90º C (also available on request with double heat exchanger) 
Pump capacity pressure mode: 

Max 4.0 bar    / Max 8.0 bar      

Max .75 l/min / Max .75 l/min

Max 4.0 bar    / Max 8.0 bar

Max .75 l/min / Max .75 l/min

Vacuum mode:  max 8m H2O (water column)   
Unit Contents:  min 16 litres / max 20 litres   
Connections:  medium: 1/2" female thread            cooling water: 3/8" male thread   
Dimensions: L 660 x W 305 x H 765 mm incl. castors and handles   
Weight: approx 65kg   
Colour:  silver grey RAL 7001 
Safety Devices
  • Level control provides auto dry run protection
  • Separate mechanical safety thermostat
  • Temperature limiter installed in the controller
  • Motor protection switch, transformer, insulation
  • Audible alarm in case of failure
Enquire Now

Need help or advice on our products? Enquire Now


Latest News

Sister Company

Did you know Tool-Temp has a sister company? www.ptauk.co.uk recently became the new UK agents for the Gammaflux range of hot runner controllers. Gammaflux is the world’s leading supplier of temperature and sequential valve gate control systems to the plastics industry. An expert in process optimization, Gammaflux products help plastic part manufacturers achieve higher quality, efficiency, and profitability. The company primarily serves the hot runner supply for the injection moulding industry but also provides temperature control solutions for blow moulding, extrusion, thermoforming and other applications. .

PTA is an in-house manufacturer of stainless steel braided hoses that can be used at temperature ranges of -20°C to 280°C. We also manufacture any standard length of hose along with specialist hoses on request. In conjunction with these hoses we also supply all types of connection fittings, valves and couplings to connect the hoses to the process and associated equipment. We have our own supply of mineral, synthetic and semi-synthetic thermal oils that cover the temperature range -20°C to 350°C. These come as standard in 25lt, 200lt and 1000lt size containers.

Read Article More News