Water Temperature Control Units

TT-118K

For use with water up to 90ºC, The TT-118 has a high cooling capacity making it suitable for use with rollers, calenders, plates, double walled vessels and other large consumers.

  • Automatic mould drain
  • Leakstopper – operation in pressure or vacuum mode
  • Self-optimising microprocessor controller with digital display of set and actual temperature
  • Level control – audible pre-shutdown warning
  • Automatic temperature control – audible alarm sounds when unit deviates outside 5ºC preset (adjustable)
  • Automatic water refill - time limited to prevent over-filling due to defective hoses
  • Connection for optional external thermocouple
  • Limescale-free heat exchanger
  • Heating switchable with unused capacity automatically cut off

Specifications
  • Temperature range: with water up to 90º C
  • Control: self-optimising microprocessor controller with digital display of set & actual temperatures
  • Flow Control: Electronic, with digital display and automatic control of minimum flow.
  • Heating capacity: 4 different models are available: 18, 24, 36 and 48 kW unused heating capacity is automatically cut off
  • Cooling Capacity: 60 000 kcal/h at 90º C
  • Pump Capacity: pressure mode: max 4.5 bar, max. 200 l/min. vacuum mode: max 8 mH2O (water column) motor 2.2 kW
  • Unit Contents: min 26 litres / max 40 litres
  • Connections: medium and cooling water 1" male thread
  • Dimensions: L 960 x W 390 x H 1070 mm incl. castors
  • Weight: approx 135 kg
  • Colour: silver grey RAL 7001
Safety Devices
  • Level control provides auto dry run protection
  • Separate mechanical safety thermostat
  • Temperature limiter installed in the controller
  • Motor protection switch, transformer, insulation
  • Audible alarm in case of failure
Enquire Now

TT-118K

For use with water up to 90ºC, The TT-118 has a high cooling capacity making it suitable for use with rollers, calenders, plates, double walled vessels and other large consumers.

Explore The Product View Full Products Range

Need help or advice on our products? Enquire Now

/Content/Images/news/Chemical.jpg

Latest News

Chemical

In 2018 Tool-Temp installed two TT430 Y units to a chemical company. These units were produced for the customer and are now listed as a machine in our product range. We flew the customer out to our head office in Switzerland to meet with the person in charge of the project, once they had all the requirements the machines went through to production. The units are equipped with three independent heat exchangers. The three-circuit cooling system makes it possible to work with oil below zero degrees. The installed self-optimizing temperature controller MP-988 works with three temperature probe inlets. The reference temperature for the regulation can be the temperature of the product inside the vessel or the oil temperature in the tank of the unit. To avoid any damage of the jacket, the pump pressure can be adjusted to the specifications of the vessel/reactor. The pump revolutions per minute can be adjusted very easily using the frequency inverter. As well as many other features.

Read Article More News