For use with water up to 90ºC, the TT-170 is a compact water temperature control unit for small injection moulds and rollers. It can also be used in laboratory applications.
The TT-181 is a small yet powerful temperature control unit designed for use with water up to 90°C for moulds up to 600kg and oil up to 150°C for moulds up to 300kg.
This powerful small temperature control unit with electronic flow control can be used with water or oil operation, and also in the leak-stopper mode. The TT-188 is a best-seller.
TT-168 E, TT-168 H: For use with water up to 90ºC or oil up to 150ºC. TT-168 E/A, TT-168 H/A: For use with water up to 90ºC for larger moulds.
TT-168 PHE is a range of specialist units with high cooling capacities. TT-168 PHE units are ideal for use with water from 20ºC to 50ºC.
For use with water up to 90ºC, The TT-118 has a high cooling capacity making it suitable for use with rollers, calenders, plates, double walled vessels and other large consumers.
This air cooled temperature control unit is designed for use with PU moulds on roundtables or for applications where no cooling water is available.
The TT-1368 is a powerful heating and cooling unit with large return volume - for temperatures from 20°C up to 90°C with very high cooling capacity - for heavy duty use.
This unit provides very high capacity direct cooling - for temperatures from 20°C up to 90°C. It is designed for rollers, plates, double walled vessels and other heavy duty use.
Latest News
In 2018 Tool-Temp installed two TT430 Y units to a chemical company. These units were produced for the customer and are now listed as a machine in our product range. We flew the customer out to our head office in Switzerland to meet with the person in charge of the project, once they had all the requirements the machines went through to production. The units are equipped with three independent heat exchangers. The three-circuit cooling system makes it possible to work with oil below zero degrees. The installed self-optimizing temperature controller MP-988 works with three temperature probe inlets. The reference temperature for the regulation can be the temperature of the product inside the vessel or the oil temperature in the tank of the unit. To avoid any damage of the jacket, the pump pressure can be adjusted to the specifications of the vessel/reactor. The pump revolutions per minute can be adjusted very easily using the frequency inverter. As well as many other features.
Read Article More News