Pressurised Water Temperature Control Units

TT-142

The TT-142 is a compact and rugged TCU for pressurised water circuits. The TT-142 provides safe and accurate temperature control for applications up to 140ºC.

  • Automatic mould drain (up to 80ºC)
  • Leakstopper – operation in pressure or vacuum mode, to allow continuous production despite leakage from mould or connections (up to 80ºC)
  • Self-optimising microprocessor controller with digital display of set and actual temperature
  • Automatic temperature control – audible alarm sounds when unit deviates outside 5ºC preset (adjustable)
  • Automatic water refill
  • Connection for optional external thermocouple
  • Heating switchable in stages
Specifications
  • Temperature Range: with water up to 140º C
  • Control: self-optimising microprocessor controller with digital display of set and actual temperatures
  • Flow Control: electronic, with digital display and automatic control of the minimum flow.
  • Models: Two models are available: TT-142N, with pump axial face seal and TT-142B, with seal less magnetic pump drive
  • Heating Capacity: 12 kW
  • Cooling Capacity: approx, 60kW – indirect
  • Cooling System: indirec
  • Pump Capacity: N-pump max 5 bar, max. 110 l/min. B-pump max 6.5 bar, max 75 l/min.
  • Filling: automatic with water filter
  • Connections: medium: 3/4" female thread, cooling water: 3/8" female thread,
  • Dimensions: L 870 x W 360 x H 915 mm incl. castors
  • Weight: approx 107 kg
  • Colour: silver grey RAL 7001
Safety Devices
  • Level control provides auto dry run protection 
  • Separate mechanical safety thermostat 
  • Temperature limiter installed in the controller 
  • Motor protection switch, transformer, insulation 
  • Audible alarm in case of failure
Enquire Now

TT-142

The TT-142 is a compact and rugged TCU for pressurised water circuits. The TT-142 provides safe and accurate temperature control for applications up to 140ºC.

Explore The Product View Full Products Range

Need help or advice on our products? Enquire Now

/Content/Images/news/Chemical.jpg

Latest News

Chemical

In 2018 Tool-Temp installed two TT430 Y units to a chemical company. These units were produced for the customer and are now listed as a machine in our product range. We flew the customer out to our head office in Switzerland to meet with the person in charge of the project, once they had all the requirements the machines went through to production. The units are equipped with three independent heat exchangers. The three-circuit cooling system makes it possible to work with oil below zero degrees. The installed self-optimizing temperature controller MP-988 works with three temperature probe inlets. The reference temperature for the regulation can be the temperature of the product inside the vessel or the oil temperature in the tank of the unit. To avoid any damage of the jacket, the pump pressure can be adjusted to the specifications of the vessel/reactor. The pump revolutions per minute can be adjusted very easily using the frequency inverter. As well as many other features.

Read Article More News