Oil Temperature Control Units
This heating and cooling unit is for temperatures from 80°C up to 300°C, is designed for heavy duty uses requiring heating capacities of 72 kW / 120 kW / 144 kW.
- Digital flow indication with control of the minimum flow
- Automatic temperature control - difference between set and actual temperature activates an alarm
- Self-optimizing temperature controller unit with digital display of the set and actual temperature. With high precision regulation in 1/10° range.
- Can be adjusted to indicate °C or °F.
- Heating with automatic cascade connection
- Lime scale free heat exchanger made of stainless steel
Closed hot oil circuit with cold oil receiver in a large expansion tank. Oil cracking is impossible. Long life expectancy of the oil, due to low watt density heating elements and a high flow rate. A drip pan under the expansion tank prevents the unit from getting dirty if it is filled incorrectly.
The lime scale free heat exchanger is a special construction made of stainless steel and is also
produced by TOOL-TEMP. The possibility to dismantle the heat exchanger grants fast and easy cleaning, although this will not be necessary during the first operating years.
Heating capacity: 72 kW switchable, 144 kW switchable
Temperature range: from 250°C until 300°C with synthetic heat transfer liquid
from 80°C until 250°C with mineral heat transfer oil
Temperature control: Self-optimizing, electronic microprocessor controller with digital display of the set and actual values and the oil flow. Automatic shut down of the heating capacity which is not required. Automatic temperature control
Flow control: Electronic with digital display and automatic control of the minimum flow
Pump capacity approx. 200 - 500 l/min. - see diagramm of pump capacity
Motor: 7,5 kW with star-delta start
Cooling capacity: approx. 600 kW - see diagramm of cooling capacity
Filling amount: 100 l 200 l
Expansion tank: 130 l 130 l
Expansion volume: approx. 100 l approx. 100 l
Colour: Silver grey RAL 7001
Dimensions: Length: 2'130 mm x Width: 1300 mm x Height: 1'960 mm
Oil circuit Flange connection DN 50 Flange outside ø 165 mm, with 4 holes ø 18 mm on a screw hole circle of 125 mm Recommended sealing: 100 x 60 x 2 mm
Cooling water circuit: 1½” female thread 1½” female thread
Required water pressure: 1,5 - 4 bar
Weight (empty): approx. 1'100 kg approx. 1'270 kg
- Level control for too much and not enough oil content, several safety thermostats, automatic outputs, transformer, main switch, motor protection switch.
- Horn in case of failure.
- All failures are in addition shown visually
- Option: a collection tank to place under the unit can be delivered in addition.