Oil Temperature Control Units


This specialist high temperature control unit is constructed under ATEX-Directive 94/9/EG for use in hazardous areas where there may be a risk of explosion.

  • With the set value transmitter the self-optimizing temperature controller can be adjusted. The actual value display shows the current temperature in 1/10°-range
  • Automatic temperature control
  • Heating switchable in stages
  • Lime scale free heat exchanger made of stainless steel
  • High temperature pump with axial face seal and triple bearing system
  • Hot oil circuit with by-pass, which ensures internal circulation if valves are closed
  • No oil cracking because of special construction of the heating elements
  • Options: MP-988 Controller with Profibus; steam condenser at outlet
  • Temperature classes: T1; T2; T3; T4

Temperature range: approx. 350°C (depending on the ATEX requirements)

Temperature control: self-optimizing microprocessor controller MP-888 with digital display
of the set and actual value.The controller is adjusted by the set value
transmitter. Automatic temperature monitoring on the actual value

ATEX-identification (94/9/EG): equipment group ll, category 2 G (IIC Tx)

Heating capacity: 9 kW 18 kW, Switchable in stages

Cooling capacity: approx. 40 kW at 220°C

Pump capacity: motor 2,2 kW: pressure mode max. 6 bar / max. 100 l/min.

Expansion tank capacity: 46 litres

Filling amount: min25 litres (heat transfer oil up to 250°C, synthetic heat transfer oil up to 350°C)

Expansion volume: approx. 36 litres

Oil circuit 3/4" BSP female thread
Cooling water inlet water filter 1" BSP female thread outlet 1" BSP male thread

Dimensions:  (L×W×H) 1'650 × 790 × 1'540 mm, incl. feet

Weight approx: 430 kg empty

Colour: silver grey RAL 7001

Safety Devices
  • Automatic level control for dry run protection
  • Fault indicator
Enquire Now

Need help or advice on our products? Enquire Now


Latest News


In 2018 Tool-Temp installed two TT430 Y units to a chemical company. These units were produced for the customer and are now listed as a machine in our product range. We flew the customer out to our head office in Switzerland to meet with the person in charge of the project, once they had all the requirements the machines went through to production. The units are equipped with three independent heat exchangers. The three-circuit cooling system makes it possible to work with oil below zero degrees. The installed self-optimizing temperature controller MP-988 works with three temperature probe inlets. The reference temperature for the regulation can be the temperature of the product inside the vessel or the oil temperature in the tank of the unit. To avoid any damage of the jacket, the pump pressure can be adjusted to the specifications of the vessel/reactor. The pump revolutions per minute can be adjusted very easily using the frequency inverter. As well as many other features.

Read Article More News