Air & water Cooled Chillers

TT-5500

This 5kW water chiller is designed for single machine applications at water temperatures from +10ºC up to +40ºC, and ambient temperatures up to +45ºC.

  • Closed water circuit with leakstopper - no more water consumption
  • Self-optimising microprocessor controller with digital display of set and actual temperature Seal-less pump made of corrosion free bronze
  • Electronic control of compressor operating time for extended working life
  • All components in contact with water are stainless steel or bronze
  • Automatic or manual refill
  • Anti-freeze thermostat prevents freezing
  • Automatic level control with pre-warning at low water level
  • Audible alarm in case of failure
Specifications
  • Model:  TT-5500 H
  • Cooling Capacity:  Nominal 5 kW
  • Cooling Capacity:  Circulating Water +10ºC up to +40ºC
  • Air Temperature:  +2ºC up to +45ºC  
  • Heating:  6 kW
  • Contents Water Tank: approx. 25 Litres
  • Refrigerating Agent:  R-134a
  • Temperature Control: Self-optimising microprocessor controller with digital display of set and actual temperatures
  • Pump Capacity: Pressure mode  -  max. 4,5 bar / max. 75l/min. Vacuum mode          Vacuum max. 8 mH20 (water column)
  • Compressor: Hermatically sealed
  • Condenser: Air cooled, air inlet located on the rear, blow out located on the side  
  • Air Volume: 1'700 m3/h
  • Power Comsumption:  approx. 2,9 kW
  • Connections:  TO/FROM mould          3/4" female thread. Automatic water refill          3/8" female thread
  • Dimensions:  L 950 x W 365 x H 740 mm incl. castors
  • Noise level: (in 3 m) 66 dBA
  • Weight:  110 kg empty
  • Colour:  Silver grey RAL 7001 or stainless
Safety Devices
  • Level control provides auto dry run protection
  • Separate mechanical safety thermostat for maximum and minimum temperature
  • Temperature limiter installed in the controller
  • Main switch, automatic cutouts, transformer and main protection switch
  • Audible and visual alarm in case of  failure
Enquire Now

TT-5500

This 5kW water chiller is designed for single machine applications at water temperatures from +10ºC up to +40ºC, and ambient temperatures up to +45ºC.

Explore The Product View Full Products Range

Need help or advice on our products? Enquire Now

/Content/Images/news/Chemical.jpg

Latest News

Chemical

In 2018 Tool-Temp installed two TT430 Y units to a chemical company. These units were produced for the customer and are now listed as a machine in our product range. We flew the customer out to our head office in Switzerland to meet with the person in charge of the project, once they had all the requirements the machines went through to production. The units are equipped with three independent heat exchangers. The three-circuit cooling system makes it possible to work with oil below zero degrees. The installed self-optimizing temperature controller MP-988 works with three temperature probe inlets. The reference temperature for the regulation can be the temperature of the product inside the vessel or the oil temperature in the tank of the unit. To avoid any damage of the jacket, the pump pressure can be adjusted to the specifications of the vessel/reactor. The pump revolutions per minute can be adjusted very easily using the frequency inverter. As well as many other features.

Read Article More News